6 volt lights

A

alex

Guest
#1
Hey, it's the new guy, alex here with a question, where do you buy lights for a motor with a 6 volt output that won't kill the spark plug?
 


Tom

Active Member
Joined
Aug 4, 2006
Messages
1,095
Likes
5
#2
I got my 6-volt light off a junk bike at a police auction for a few bucks. I was lucky that it worked.

I would check a local bike shop, but your best bet would probably be ebay.
 

C

Cookie

Guest
#3
Light

6V gives you enough light to be seen but at 30 mph at night you have just enough time to say OH SHI&^!!!

Cookie
 

S

sideshowsideswipe

Guest
#4
get the schwinn dynamo set from target and ditch the dynamo... the lights require only 6 watts 3 volts which is exactly what the white wire puts out.
 

D

davidsis

Guest
#5
Dynamo

Do you have a picture of the dinamo, and isn't that what the kill switch goes on, and will the kill switch still work?
 

G

gone_fishin

Guest
#6
blue wire: signal to CDI (splice the kill switch here to be technically correct & ground the signal itself)
black wire: ground back to magneto
white wire: output (grounding this will kill the engine, but only because of overload)
 

B

bird

Guest
#7
has anyone seen the oldschool bullet lights that have the l.e.d.s in them they are actually realy good lights and not to expensive.
 

D

davidsis

Guest
#8
Old school light

No, have not seen it. Where can we find it. also, aug what you are saying is hook it up to the blue wire. or the white one. all the wires are used up though?????????? Which one?
 

G

gone_fishin

Guest
#9
bottom line...if you're NOT using any electrical accessories, the white wire would just be capped. the ignition circuit is the blue & black wires.
 





Top