80 cc help

[gprodro]

i just put a new Air Manifold Intake
on my 80cc engine.. the carb is tilted forward more than usual becouse of the Air Manifold Intake.. and my engine is still running really fast. how do i fix these problems? do i need to fix the pin in the carberator?

 

[Chainlube]

i just put a new Air Manifold Intake
on my 80cc engine.. the carb is tilted forward more than usual becouse of the Air Manifold Intake.. and my engine is still running really fast. how do i fix these problems? do i need to fix the pin in the carberator?

You probably have an air leak. Do have a picture of your carb and engine?

 

[Karl Snarl]

i just put a new Air Manifold Intake
on my 80cc engine.. the carb is tilted forward more than usual becouse of the Air Manifold Intake.. and my engine is still running really fast. how do i fix these problems? do i need to fix the pin in the carberator?

I'd check for an air leak as Chainlube said, and also please do shoot us a picture, so we can see if it is tilted to much.

 

[Greg58]

Did you take the top off the carburetor? The barrel only goes one way.

 

[Greg58]

The notch goes to the idle screw, the long slot goes to the guide pin.

 

[gprodro]

You probably have an air leak. Do have a picture of your carb and engine?

 

[gprodro]

I'd check for an air leak as Chainlube said, and also please do shoot us a picture, so we can see if it is tilted to much.

 

[gprodro]

Did you take the top off the carburetor? The barrel only goes one way.

no i did not. theres pictures down below tosee the carb

 

[Mossy]

Is that a hole for a boost or something at the top of that? And the angle is way off... You can mount the motor so it's level... If you can... Never seen that intake before...

 

[gprodro]

Is that a hole for a boost or something at the top of that? And the angle is way off... You can mount the motor so it's level... If you can... Never seen that intake before...

yes that is the hole for the boost bottle. i got it off bikeberry.com. the width is 40mm. now how would i know if the carb is at the right angle to run?