80 cc help

Mossy

Well-Known Member
Local time
7:31 AM
Joined
Jan 7, 2022
Messages
2,648
The top of the bowl needs to be as level to the ground as you can get it... The hole needs to be plugged it's making it run lean... Not good for it and the boost doesn't work anyway
 

Mossy

Well-Known Member
Local time
7:31 AM
Joined
Jan 7, 2022
Messages
2,648
You would be better off with this...
 

Attachments

  • Screenshot_20220326-145229.png
    Screenshot_20220326-145229.png
    212.4 KB · Views: 36

gprodro

New Member
Local time
9:31 AM
Joined
Mar 25, 2022
Messages
8
The top of the bowl needs to be as level to the ground as you can get it... The hole needs to be plugged it's making it run lean... Not good for it and the boost doesn't work anyway
What bowl are you speaking of? The carb? that's probably why the engine is running to fast? Ill tape it
 

gprodro

New Member
Local time
9:31 AM
Joined
Mar 25, 2022
Messages
8
You would be better off with this...
That intake Manifold came out of the kit.. So i got the other one to try to "upgrade" it....not knowing how the angle would effect everything
 

Attachments

  • 20220326_172830.jpg
    20220326_172830.jpg
    110.1 KB · Views: 38

Chainlube

Well-Known Member
Local time
6:31 AM
Joined
Jan 5, 2020
Messages
6,437
That intake Manifold came out of the kit.. So i got the other one to try to "upgrade" it....not knowing how the angle would effect everything
The carb angle affects how much fuel is in the float bowl, with too much angle the float will top out before the bowl is full. This will lead to a lean running or not running situation.
 
Top