A mods/fixes checklist for installing a Honda GXH50 frame mount kit

Grube 4g trans

Hi Ron, check close before you might try to interchange those two trannys. The 4g uses the same engine config as your titan, but the earlier style gearbox requires a crankshaft end to be protruding into the box to run the clutch bell on.

The 80mm clutch like RS, and many small engines is contained inside the engine case, and the HS for Hoot, and HS for Grube use a standard configuration like an old Briggs and Stratton.


Mike
 
Hi Mbm, I Don`t Have Either Of Those Transmissions. All The Negative I Have Heard About Those Older Trans Make The Belt Drive Look Good. All My Motors Are 78mm And Two Tecumseh 54 Mm. So Far My Titan/hs Motors Run Very Well. Thanks For The Reply. Ron
 
Back
Top