ADA Racing Intake Kit

zipdrivex

Member
Local time
12:33 AM
Joined
May 14, 2008
Messages
43
Location
Billings Montana
I purchased this intake kit from www.adaracing.com and I strongly suggest anyone who wants a little bit more oomph to get this kit!! It comes with the chrome filter with the ADA Racing logo on it, a chrome velocity stack, and a very nice choke. The difference was incredibly noticeable.
 

Attachments

  • l_eb4ebeb70b31e1a08523a46b5c0ac36e.jpg
    l_eb4ebeb70b31e1a08523a46b5c0ac36e.jpg
    74 KB · Views: 436
I will gladly post more pictures of the set up. What part of the wheel would you like to see? If there's a certain point or view you would like let me know so I can be sure to take the right shots.
 
i just wondered how you got power with the engine mounted so low. i have an occ chopper. that area is used for the rear pull brake. thanks mitch
 
The kit is a Dimension Edge friction drive. It uses an inch and 3/4 urathane roller directly onto the tire. Here's a couple pics for ya stude13.
 

Attachments

  • P5170043.JPG
    P5170043.JPG
    72.7 KB · Views: 316
  • P5170044.JPG
    P5170044.JPG
    68.1 KB · Views: 332
back again, i dont see a kit. i see a bracket w/bearing w/roller and engine held on by 4 bolts going into the motor surrounding the clutch. can that be it?
 
If that's all there is to it then that's about as simple as it gets. This might be the setup I need for my Slick Daddy.
 
Back
Top