Exhaust Any Cheap Easy Muffler Tips?

You can use cut down old aluminm handlebars for exhaust extensions sometimes. They should have the amount of curve that is needed.
 
here's what i did.
I'm using the stock muffler body with a modified inner baffle, hooked to my spookytooth exp. chamber. On the end of the stock muffler body i put a chrome turnout exhaust tip that i got at autozone for like $8.00.
your muffler is smaller in diameter than the stock muffler body so you will have to find an exhaust tip with a smaller inner diamter that will fit over that muffler.
muffler-1.jpg

pipe1.jpg

pipe2.jpg
 
Last edited:
Mufflers

I use this muffler with my SBP expansion pipe:

http://www.sickbikeparts.com/catalo...ler&osCsid=2pl3b7p9kkjc7c4me7lt36tb37&x=0&y=0

I have it clamped to the chainstay, a few inches from the rear axle. It works great, but it spits oil all over my rear wheel and disc brake. I need to bolt a 45-degree tip , so it'll divert the gases away from the rear wheel.

Any suggestions?

Remember, I'm cheap.:whistle:

Try this info http://motoredbikes.com/showthread.php?t=7904&highlight=Hive

I tried twice and they never really were much good, so I quit. Too much trouble for end result for me. If this thing works well, let me know, 6 scoots seems low cost enough, if it works.
 
Back
Top