Any creative way for cable management?

Discussion in 'Electrical' started by aranor104, May 16, 2015.

  1. aranor104

    aranor104 New Member

    So for a long time the electric cables were hanging near the coil, exposed and it looks ugly..
    I tried to dutch tape them to the frame but that just made it look worse.
    Any ideas?

  2. wheelbender6

    wheelbender6 Well-Known Member

    I used automotive split wire loom. Its a start.
  3. Slogger

    Slogger Member

    I wired my bike with 2 conductor 18 awg lamp cord from a home improvement store. It took about 6 feet.
    I don't really recommend it because it's interior wire, but if you keep it away from hot parts it really tidies things up. It's black like the frame so it is hard to see at all.
    Did it last August and it's holding up fine.
  4. The_Aleman

    The_Aleman Active Member

    Like wheelbender posted, wire loom of several different sizes works great for creating your own wiring housing.
    It's easy to merge smaller ones into larger to create a central wiring backbone that's easy to remove from the bike if necessary.

    A pipe clamp on frame with a rubberized clamp for securing the housing works to keep it in place til you don't want to.
  5. 2old2learn

    2old2learn Member

    Anyone have a source for a cable splitter for the Cree light power supply? I've seen the splitter that provides an extra USB port but I'm just wanting a double plug to run two different lights, each with its own control switch.