Arc welding frames

I finished today just thought I reveal the results. It went pretty well, the only pain was repositioning the bike over and over again. I reinforced it with some handlebars I cut in half
IMG_20220422_174925420.jpg
 

Attachments

  • IMG_20220430_172640212.jpg
    IMG_20220430_172640212.jpg
    209.3 KB · Views: 71
  • IMG_20220501_020020740.jpg
    IMG_20220501_020020740.jpg
    216.1 KB · Views: 70
I had a frame break here it tore out a piece of the top tube on both sides where it was welded.. it was about 1/2" above where it belonged... Welded all the way around it and back to the seat post...
 

Attachments

  • Screenshot_20220501-011722.png
    Screenshot_20220501-011722.png
    394.9 KB · Views: 84
I replaced the bottom tube with an exaust pipe because it broke about where the spark plugs boot is dangling...
 

Attachments

  • Screenshot_20220501-011637.png
    Screenshot_20220501-011637.png
    427.6 KB · Views: 64
I added an extra set of chainstays from a 26" Roadmaster mountain bike because it was straight.. from about 1/2 way between the engine mount and the seat
 

Attachments

  • Screenshot_20220501-011604.png
    Screenshot_20220501-011604.png
    394.9 KB · Views: 77
Back
Top