Barrel stuck in carb

[daveet66]

Can anyone tell me how I can get stuck clutch barrel out of carb I have clipped the cable got needle and spring out tried everything its not budging? Thanks

 

[ImpulseRocket]

Are we talking the throttle slide or a cable housing ferrule? Have a picture?

 

[mony0_3]

Remove carb and try prying from the air filter side.

 

[Cisco]

how I can get stuck clutch barrel out of carb

The same way you get the bearings out of the muffler, with a big hammer

 

[daveet66]

The same way you get the bearings out of the muffler, with a big hammer

I tried its in there good said %%% it ordered another one!

 

[Axl Myk]

Must have put the barrel in backwards, then rammed it down.

 

[DAMIEN1307]

To avoid this happening again with the barrel getting stuck in the carby, be sure that the little nub protruding on the inside of the slide chamber is lined up so that the length long slit/groove has that nub contained inside that groove and should easily slide up and down.

You will see the groove i'm talking about in the picture provided below...The barrel can only go in this way in order to work properly.