Firstbuild408
New Member
- Local time
- 11:08 PM
- Joined
- Nov 18, 2019
- Messages
- 16
So I was riding full throttle on my new Chinese 2 stroke engine. I know dumb. Hasn’t had even 50 miles on it yet and now it does not run. It started when I changed the spark plug to an NGK B6HS which made is run better but the idle was way to high so I moved the c clip in the carburetor pin to full lean. I also moved the idle screw which helped a lot. So the problem I had was the engine was running way hotter than before and it got so hot it smoked but I didn’t stop. Again I know dumb. So the bike slows from 30mph to 10mph full throttle then dies. When I try to start it up again it makes a clicking noise like it’s not seized but something might have broken?
I have the motoos 80cc motorized 2 stroke kit from amazon. If anyone can give me advice to what to test it what might have happened would be appreciated.
I have the motoos 80cc motorized 2 stroke kit from amazon. If anyone can give me advice to what to test it what might have happened would be appreciated.