Check behind the mag cover for fuel residue w/ black shavings. Maybe also check your KILL switch. Blown seals will drop your crank case pressure. Some more info. would be help pin it down.
Check behind the mag cover for fuel residue w/ black shavings. Maybe also check your KILL switch. Blown seals will drop your crank case pressure. Some more info. would be help pin it down.
Kill switch checks out the fuel is around 6 months old,reset float on my carb to 21mm.all gaskets appear good.done several top end rebuilds, maybe bottom end is tired think best bet is new zeda triple 40.
Any advise is very much appreciated