Bike starts and idles but when i ride it ,just dies

[Gasbikejerry1967]

I was curious if bad crank seals would be the culprit

 

[Deleted member 27811]

I was curious if bad crank seals would be the culprit

Check behind the mag cover for fuel residue w/ black shavings. Maybe also check your KILL switch. Blown seals will drop your crank case pressure. Some more info. would be help pin it down.

 

[Gasbikejerry1967]

Check behind the mag cover for fuel residue w/ black shavings. Maybe also check your KILL switch. Blown seals will drop your crank case pressure. Some more info. would be help pin it down.

Thanks I'll check it out after I get done with work

 

[Gasbikejerry1967]

Thanks I'll check it out after I get done with work

Kill switch checks out the fuel is around 6 months old,reset float on my carb to 21mm.all gaskets appear good.done several top end rebuilds, maybe bottom end is tired think best bet is new zeda triple 40.
Any advise is very much appreciated

 

[FNTPuck]

Compression check? How does the plug look?

Did you try with fresh gas? 6mos is pretty old, most gas starts going bad around the 3mo mark down here in hot and humid FL.

 

[Gasbikejerry1967]

Compression check? How does the plug look?

Did you try with fresh gas? 6mos is pretty old, most gas starts going bad around the 3mo mark down here in hot and humid FL.

I want to thank everyone for the help.
The issue ended up being warped cylinder head wouldn't seal. Ordered new parts be on road this week

 

[FNTPuck]

I want to thank everyone for the help.
The issue ended up being warped cylinder head wouldn't seal. Ordered new parts be on road this week

Glad you got it figured out!