bmp fd CLUTCH BELL Q'S
- Thread starter prichmon
- Start date
BentTooner
Member
- Local time
- 9:50 AM
- Joined
- May 27, 2010
- Messages
- 53
Hi,
The BMP FD kit uses a 78mm clutch drum. The following web site shows two 78mm clutch bells with either an 8mm x 1.25 thread or a 10mm x 1.25 thread. My guess is the EH035 uses the smaller one (8mm):
http://scootercrossing.com/Scooter_Parts/Clutch/Clutch.html
I hope this helps!
The BMP FD kit uses a 78mm clutch drum. The following web site shows two 78mm clutch bells with either an 8mm x 1.25 thread or a 10mm x 1.25 thread. My guess is the EH035 uses the smaller one (8mm):
http://scootercrossing.com/Scooter_Parts/Clutch/Clutch.html
I hope this helps!
rawly old
Active Member
- Local time
- 9:50 AM
- Joined
- Feb 27, 2011
- Messages
- 606
Prichmon:
BMP no longer exists, the drums Staton sells are 3/8"-24 thread, as are most
78mm to be found on Ebay. Staton's appear to be of higher quality, but there
are others less costly. Monster Scooter Parts had the same bells as Staton for
$5 less, but as of this post they are out of stock....hmm, maybe Staton bot'em
all?
I'm pretty sure 3/8"- 24 is the same as 8mm x 1.25 having checked on my
inch/mm ruler.
BMP no longer exists, the drums Staton sells are 3/8"-24 thread, as are most
78mm to be found on Ebay. Staton's appear to be of higher quality, but there
are others less costly. Monster Scooter Parts had the same bells as Staton for
$5 less, but as of this post they are out of stock....hmm, maybe Staton bot'em
all?
I'm pretty sure 3/8"- 24 is the same as 8mm x 1.25 having checked on my
inch/mm ruler.
Last edited:
Silvaire
Member
I do not know what thread BMP used on their clutch bells, but Staton offers 78mm clutch bells in both 3/8-24 and 9/16-18 thread.
3/8-24 thread is not the same as 8mm X 1.25 thread.
(For starters, 3/8" = 9.525mm)
3/8-24 thread is not the same as 8mm X 1.25 thread.
(For starters, 3/8" = 9.525mm)
Similar threads
