6blueoval9
Well-Known Member
Just another level of bolt ons I'm working on....I'll be sure to clean off the shavings.
Bolt on phase
- Thread starter 6blueoval9
- Start date
6blueoval9
Well-Known Member
Always some goodies waiting for me in the mail...LGC clutch with a cross drilled plate and an MZ65 pipe coming soon...OZ Reed I should have next week sometime.
The PZ16 .. the SHA clone I'll have Monday.
Polini 10x36 wrist pin and Malossi g clips.
35mm foam air filter with 45 degree hose for the PZ16 next to filter that came with the PZ16.
The PZ16 .. the SHA clone I'll have Monday.
Polini 10x36 wrist pin and Malossi g clips.
35mm foam air filter with 45 degree hose for the PZ16 next to filter that came with the PZ16.
Last edited:
6blueoval9
Well-Known Member
Finished up my windowed piston I'm using with the cylinder above.
Lots if circular machining marks on top of the piston dome that needed to be removed before polishing...any and all sharp edges taken care of with some improvements made to aid air flow through the windows along with some oiling improvements...Ready to rock and roll.
Should be a rather large improvement with the 3rd stage of bolt ons I'm showing.
Next up a reed case build
Lots if circular machining marks on top of the piston dome that needed to be removed before polishing...any and all sharp edges taken care of with some improvements made to aid air flow through the windows along with some oiling improvements...Ready to rock and roll.
Should be a rather large improvement with the 3rd stage of bolt ons I'm showing.
Next up a reed case build
Attachments
Spare_Parts
Well-Known Member
Very nice work. Definitely watching this one.
6blueoval9
Well-Known Member
Not the build thread...just showing sneak peeks.
6blueoval9
Well-Known Member
more goodies arrived today at work.
Oz Reed with 3 different sized intakes...some mods will be done to the reed before it's used.
SHA 15mm clone to add to the collection.
.6 copper head gasket
Complete gasket set.
Upcoming future arrivals:
Mikuni VM18 carburetor
Mikuni VM24 carburetor
Dellorto PHBG 17.5 mm clone carburetor
Dellorto PHBG 19mm clone carburetor
Dellorto PHBG 21mm clone carburetor
LGC clutch with cross drilled plate.
GT90 reed case conversion kit.
Nikasil plated cylinder after custom porting for reed case build.
Trued and balanced authentic PK80 40mm crank and rod assembly.
Ignore the air filter in the pic, it won't be used.
Oz Reed with 3 different sized intakes...some mods will be done to the reed before it's used.
SHA 15mm clone to add to the collection.
.6 copper head gasket
Complete gasket set.
Upcoming future arrivals:
Mikuni VM18 carburetor
Mikuni VM24 carburetor
Dellorto PHBG 17.5 mm clone carburetor
Dellorto PHBG 19mm clone carburetor
Dellorto PHBG 21mm clone carburetor
LGC clutch with cross drilled plate.
GT90 reed case conversion kit.
Nikasil plated cylinder after custom porting for reed case build.
Trued and balanced authentic PK80 40mm crank and rod assembly.
Ignore the air filter in the pic, it won't be used.
Last edited:
Spare_Parts
Well-Known Member
Damn, how many engines are you building? Do you have a link for the plater?
6blueoval9
Well-Known Member
One for now but some of the parts are to add on to the motor after the modded stock parts are tested... then it's on to a reed case build...No expense spared.
Last edited:
