Bracket help

[Zoom555]

I recently picked up a set of pw-50 shocks and need help on how to mount them to the frame. I have a set of clamps that have a rubber bushing but when weight is applied the clamps slide down from the bushing. Added pics so you can see. Any ideas on how to attach these?

 

[Chainlube]

Wrap a piece of inner time around frame before attaching.

 

[Zoom555]

Wrap a piece of inner time around frame before attaching.

I already have rubber. The problem is the metal part of the clamp slides down from the rubber.

 

[Wrench]

Put a small clamp below the shock clamp to keep it from sliding

Cool small clamp to fit your frame tubing, Or weld something on,

 

[Chainlube]

I already have rubber. The problem is the metal part of the clamp slides down from the rubber.

Yea, I see those. They're in upside down, you'll have to Red Green it to get it to stay.

 

[Zoom555]

Put a small clamp below the shock clamp to keep it from sliding

Cool small clamp to fit your frame tubing, Or weld something on,

I cant find any clamps that I think will work well enough. Do you think I could weld a U shaped price of metal on to the frame drill a hole thru it and mound shock that way?

 

[Zoom555]

Yea, I see those. They're in upside down, you'll have to Red Green it to get it to stay.

So duct tape. Haha!

 

[Chainlube]

I

So duct tape. Haha!

I still a piece of inner tube around the bar before you put those other blocks on will take up the gap and get it to stay.

 

[Chainlube]

I cant find any clamps that I think will work well enough. Do you think I could weld a U shaped price of metal on to the frame drill a hole thru it and mound shock that way?

Just weld a little piece of steel right below the desired location to keep them from sliding.

 

[Zoom555]

I

I still a piece of inner tube around the bar before you put those other blocks on will take up the gap and get it to stay.

Yeah that might be enough to get them tight enough to hold my fat ass.