I stripped out my backside motor mount and have drilled out out and recapped it twice and it stripped again, I tried jb welding the bolts in and the jb weld is coming out. I have everything I need but I need a new motor. Is there anywhere I can buy just the motor? I have found a build your own one but I don't know enough about engines to build one. Can someone post a link for a pre-built engine?
Buy engine only
- Thread starter Slaz
- Start date
shinjinian
Member
Google and ebay are your friends http://www.ebay.com/itm/Bicycle-eng...Parts_Accessories&hash=item4d22ec9cef&vxp=mtr
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
crassius
Well-Known Member
- Local time
- 10:38 AM
- Joined
- Jul 23, 2012
- Messages
- 4,550
I've had good luck shortening head studs & threading them all the way down & into the rear mount holes - be sure they'll fit past the seat post tho as some frames are a bit wider.
I do this after a failure back there because that metal on the motor has often been hammered pretty badly and is now too weak for normal sized studs.
I do this after a failure back there because that metal on the motor has often been hammered pretty badly and is now too weak for normal sized studs.
