Camshaft Sliding

Discussion in '2-Stroke Engines' started by techtiger, Sep 9, 2012.

  1. techtiger

    techtiger New Member

    Everytime I hit a bump the camshaft with the clutch arm slides out of the hole and doesnt allow me to use the clutch. What do I need to do to keep it from popping out?

  2. MotorBicycleRacing

    MotorBicycleRacing Well-Known Member

    Take the cover off and look on the backside where you will see that
    there is a missing pin that holds the shaft in place.
  3. crassius

    crassius Well-Known Member

    what he said, plus if the mounting point for the pin is broken, just drill a tiny hole thru at that point and run a 6x32 or similar screw right thru from the outside with a nut on the inside
  4. techtiger

    techtiger New Member

    Thanks for your help guys.