Chris7420
New Member
- Local time
- 6:12 AM
- Joined
- Mar 30, 2022
- Messages
- 1
Does anyone know what is the size of the intake where the carb slips on? I have a Zeda 80 engine I installed a reed valve but the intake tube on the reed valve where the carb goes on is the same size cause my stock nt carb slid right on. I want to upgrade to a mikuni vm18 carb and it says the diameter where it slips on to the intake is 18mm, someone told me that’s too small but I saw one posted for sale that says it’s a direct fit for motorized bikes there also a thread on here where a guy says it slipped right onto his intake. Can anyone confirm?
Carb I want to buy - https://www.ebay.com/itm/275190710052?hash=item4012a4ff24:g:ulsAAOSwmHhiHx0q
My reed valve - https://www.amazon.ca/Niome-Racing-...ocphy=1001825&hvtargid=pla-828268773499&psc=1
Post I referenced - https://motoredbikes.com/threads/18mm-mikuni-carb.12891/
Carb I want to buy - https://www.ebay.com/itm/275190710052?hash=item4012a4ff24:g:ulsAAOSwmHhiHx0q
My reed valve - https://www.amazon.ca/Niome-Racing-...ocphy=1001825&hvtargid=pla-828268773499&psc=1
Post I referenced - https://motoredbikes.com/threads/18mm-mikuni-carb.12891/
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.