Carburetors and things

Demon Speed

Member
Joined
Apr 8, 2020
Messages
33
Hey everybody out there. Demon Speed back once again. Can anybody out there please tell me what type of carb this is Ahmed possibly how to connect the linkage? I'm having some troubles with it. It was over a year ago when i took it off. Things get moved and lost,forgotten, yadda,yadda,yadda. Anyway out would be mucho appreciated. Thank you to all
 


Chainlube

Well-Known Member
Joined
Jan 5, 2020
Messages
1,146
Hey everybody out there. Demon Speed back once again. Can anybody out there please tell me what type of carb this is Ahmed possibly how to connect the linkage? I'm having some troubles with it. It was over a year ago when i took it off. Things get moved and lost,forgotten, yadda,yadda,yadda. Anyway out would be mucho appreciated. Thank you to all
You forgot the picture.
 

darwin

Well-Known Member
Joined
May 26, 2008
Messages
3,843
That hole in the angled piece of metal holds the cable barrel adjustment screw that the cable goes through. The barrel screw just screws in there w/a locking nut to hold it tight. At the end of the cable is the cable end usually brass/lead and that slides through the cable barrel adjustment screw and locks/slides [only 1 way] into that throttle pivot holder.
 

Demon Speed

Member
Joined
Apr 8, 2020
Messages
33
That hole in the angled piece of metal holds the cable barrel adjustment screw that the cable goes through. The barrel screw just screws in there w/a locking nut to hold it tight. At the end of the cable is the cable end usually brass/lead and that slides through the cable barrel adjustment screw and locks/slides [only 1 way] into that throttle pivot holder.
Thank you
 

Demon Speed

Member
Joined
Apr 8, 2020
Messages
33
That hole in the angled piece of metal holds the cable barrel adjustment screw that the cable goes through. The barrel screw just screws in there w/a locking nut to hold it tight. At the end of the cable is the cable end usually brass/lead and that slides through the cable barrel adjustment screw and locks/slides [only 1 way] into that throttle pivot holder.
Hey Darwin, thank you. I've got it hooked up.
 

Attachments

Top