montytradition
New Member
Changing out the stock HT plug wire and boot is one of the first things on my to do list, I've got the parts (NGK B6HS and a better quality lead/boot) but I've just realised that the CDI is entirely sealed with some kind of black waxy looking plastic. There are no screws or plates that are able to be removed, so it looks practically impossible to get in to.
Question is, how do I fit the new lead if the CDI is impenetrable. I know I could simpy cut the stock lead close to the base of the CDI and wire it from there, but wouldn't that defeat the purpose of a higher quality part?
Or do I simply hack it apart and rebox the guts back into a little waterproof circuit box after it's wired, providing it isn't damaged.
Thanks!
Question is, how do I fit the new lead if the CDI is impenetrable. I know I could simpy cut the stock lead close to the base of the CDI and wire it from there, but wouldn't that defeat the purpose of a higher quality part?
Or do I simply hack it apart and rebox the guts back into a little waterproof circuit box after it's wired, providing it isn't damaged.
Thanks!