Centerfugal clutch springs, where to buy?

[Buzzard2]

Hi all i need springs for both a 54mm and 78 mm clutch HELP!!!

 

[Chainlube]

Look into a go cart store, they'll have them in different weights, it just depends on your state of tune.

 

[5-7HEAVEN]

Which type of clutch springs?

There are large single springs, shorter dual springs and thinner triple springs.

 

[5-7HEAVEN]

Try Dave at:

DDM Racing/Dave’s Discount Motors

1000's of 1/5th scale HPI, Losi, RCMK, Kraken Vetka, stock and upgrade parts. Axial R/C rock crawler stock and upgrade parts! Go-Ped Scooter Parts. Zenoah & CY Engines.

www.davesmotors.com

 

[Buzzard2]

thank you what are the normal springs, if you have a FD each clutch seems to be same. I have no idea how to ge the old one off and cheaper to do the springs

Try Dave at:

DDM Racing/Dave’s Discount Motors

1000's of 1/5th scale HPI, Losi, RCMK, Kraken Vetka, stock and upgrade parts. Axial R/C rock crawler stock and upgrade parts! Go-Ped Scooter Parts. Zenoah & CY Engines.

www.davesmotors.com

the

 

[5-7HEAVEN]

What engine do you have?

 

[Buzzard2]

What engine do you have?

honda gx 31,
kind of a new prob i took the engine off and wat i thought to be a broken clutch turned out to be a fried roller, in fact i just pulled the whole thing out it was no longer really set, it was floating in there. So loose that it was binding to the clutch on a pull start . NOW how to get the clutch off. Which way does it turn , to get off any tricks to know. I have another body with roller But , it had a clutch bell shear off so it too has to be removed.

 

[5-7HEAVEN]

Pictures would help with troubleshooting.

Sometimes, it's easier to simply replace the entire clutch, bell, bearings and roller.

Ask me how I know this?

 

[Buzzard2]

d

Pictures would help with troubleshooting.

Sometimes, it's easier to simply replace the entire clutch, bell, bearings and roller.

Ask me how I know this?

do you use an oil wrench?

 

[5-7HEAVEN]

My bell is destroyed, by the time I remove it.

I have many bells, so I just replace it, along with the bearings.

It was a major pain to R&R the spindle & bearings,
until I modified them to be slip-fitted.