D
dr_clabo
Guest
I will search for the pulley (idler) problem next.
Nothing to address below in search:
It is not parallel with the chain because the lower arms off the crank are not parallel with the chain (perpendicular to the rear axle) - they are slightly angled outward.
Just go buy a torch and go at it?
Shim?
What might be the expert prescribed and tried & true method?
Many, Many Thanks in advance,
Dr_Clabo
Nothing to address below in search:
It is not parallel with the chain because the lower arms off the crank are not parallel with the chain (perpendicular to the rear axle) - they are slightly angled outward.
Just go buy a torch and go at it?
Shim?
What might be the expert prescribed and tried & true method?
Many, Many Thanks in advance,
Dr_Clabo