grinningremlin
Active Member
Found this looking for a better/cheaper supplier of the drive gears for the GEBE.GEBE charges $34 for each gear, which seems WAY too high to me.Granted, you'll have to do a little home machining, file some flats, and tap/thread the inner bore, but $12 sounds a lot better than $34.And GEBE states their gears are file hard, they lie, a cheap hacksaw goes through them like butter, but it's a quick way to get twice the life, cut off the end, flip the gear and use the cut off end as a locknut.
http://www.amazon.com/5M12X9-Ametric®-Timing-Diameter-Overall/dp/B00DHIW2RQ
http://www.amazon.com/5M12X9-Ametric®-Timing-Diameter-Overall/dp/B00DHIW2RQ
Links to Amazon may include affiliate code. If you click on an Amazon link and make a purchase, this forum may earn a small commission.