weefek
Well-Known Member
- Local time
- 7:56 AM
- Joined
- May 14, 2022
- Messages
- 710
Anyone have a good lead or any ideas on a good clutch barrel gear? Here's my original stock clutch barrel gear with about 517 km / 321 miles on it. I rebuilt a "new" clutch I got and threw it on my current bike / motor and it's amazing so far. Was centered proplerly and just opened it up to accept 1/8" ball bearings.
Regardless, as you can tell by the picture it's out of round. And by that I don't mean oval. It seems that they have machined it wrong from the factory. Approx 3mm gap on the top from pad to innner and 4mm on the bottom to inner (not including excess flashing which there was a lot).
Is there any place any of ya'll have bought this part with good results / good quality? The clutch has been a constant bane of mine causing noise and nonsense.
Regardless, as you can tell by the picture it's out of round. And by that I don't mean oval. It seems that they have machined it wrong from the factory. Approx 3mm gap on the top from pad to innner and 4mm on the bottom to inner (not including excess flashing which there was a lot).
Is there any place any of ya'll have bought this part with good results / good quality? The clutch has been a constant bane of mine causing noise and nonsense.