Clutch cable re-routing modification.

Discussion in 'General Questions' started by OneLittleVictory, Mar 28, 2014.

  1. OneLittleVictory

    OneLittleVictory New Member

    Hi all. Somewhere on this forum I saw a member that had routed his clutch cable around a pulley that was mounted to a bracket of some sort, which mounts to the clutch cover. I was just wondering who supplies these. I'd like to try it so I can possibly lower my carb and use a manic mechanic billet intake manifold that will accept my boost bottle. Thanks!

  2. butterbean

    butterbean Well-Known Member

  3. butterbean

    butterbean Well-Known Member

    But the clutch roller doesn't change the location of the clutch arm, so you may still have clearance issues with your carb.
  4. Fabian

    Fabian Well-Known Member

  5. OneLittleVictory

    OneLittleVictory New Member

    Not too worried about the clutch arm, as I'm sure it will clear the carb. If not, I can just adjust the clutch accordingly to move the arm a little more to the outside. I'm just concerned about the cable coming in at an angle right under the bowl. Thanks guys!