Clutch Clutch doesn't fully disengage

lukecanna

Member
Joined
Sep 25, 2017
Messages
79
Hi Everyone,
Having a bit of a weird problem here as my clutch won't fully disengage so when I pull the lever in I can still here the plate spinning on the pads.
At first I thought it was my clutch lever touching the frame and loosening the cable but it is fully tightened and has little free play.
20180629_131608.jpg

20180629_131602.jpg

Can the clutch pin in the main drive sprocket be worn out? If so where do you find one.
I do have a different clutch lever installed but doubt it's the problem https://www.ebay.com.au/itm/262410956375
 


crassius

Well-Known Member
Joined
Jul 23, 2012
Messages
4,575
first, loosen cable then loosen the flower nut to see if clutch arm returns to the straight back position - if so, adjust cable for just a bit of slack at that position
 

inspectorcritic

Well-Known Member
Joined
Dec 13, 2015
Messages
1,177
Yah
Hi Everyone,
Having a bit of a weird problem here as my clutch won't fully disengage so when I pull the lever in I can still here the plate spinning on the pads.
At first I thought it was my clutch lever touching the frame and loosening the cable but it is fully tightened and has little free play.
View attachment 82599
View attachment 82600
Can the clutch pin in the main drive sprocket be worn out? If so where do you find one.
I do have a different clutch lever installed but doubt it's the problem https://www.ebay.com.au/itm/262410956375
Ya there is 4 different ways to adjust your clutch there is the flower nut beneath the case then there is the handle screw then further on down there is the bracket screw then on the clutch arm screw take your pick or all.
 
Top