Clutch issues

Negative I tightened the flower nut and put back the screw, but ntn the back wheel moves freely with or without me pulling in the clutch lever
It was working fine but they all of a sudden my
Clutch went out , and now the lever is extremely loose, I’ve adjusted it but to no avail
 
It was working fine but they all of a sudden my
Clutch went out , and now the lever is extremely loose, I’ve adjusted it but to no avail
At this point you will need to start taking things apart. This problem could be a sheared off woodruff key on the sprocket or clutch basket or something else broken as suggested above.
 
At this point you will need to start taking things apart. This problem could be a sheared off woodruff key on the sprocket or clutch basket or something else broken as suggested above.
Found out the issue, it was my preload spring , so I tightened that up by sticking a thin Allen wrench inside after I took the clutch cable anchor pívot . Stuck it the Allen wrench inside till I felt a slot and rolled the bike back till I felt 2 clicks and it worked
 

Attachments

  • IMG_1332.jpeg
    IMG_1332.jpeg
    94.6 KB · Views: 43
Back
Top