Clutch Pin Help

Discussion in 'Frame Mounted Engines' started by troyaero, Oct 25, 2007.

Tags: Add Tags
  1. troyaero

    troyaero Guest

    Hi all,

    I have an 80CC engine kit that I got from King a few years back but have never used (looks like the DAX 80CC). I had removed the gear drive cover that has the clutch control arm and then at some point put in all in a box. Well, in all the moving around of the box in the my workshop I have lost the Clutch Pin which is the metal dowel installed in the center of the sprocket.

    I have a lathe so I made a new one but it sure would help if someone could tell me how long the pin is.

    Next time I'll be better with putting things back together if they are going to set awhile!


  2. azbill

    azbill Active Member

    there is also a ball bearing behind the pin
    you might be missing it as well
    (stick a magnet in the hole to see if it's still there)
    dax sells the pins