Clutch Screw Came Out!!

Discussion in 'Frame Mounted Engines' started by npk1977, Aug 8, 2007.

Tags: Add Tags
  1. npk1977

    npk1977 Guest

    All --

    Somewhere, there should be a notice to tighten clutch screws. I'm talking about the screws that retain element (1) in this diagram:

    Look at the attached image, the clutch screw wore a pattern in my clutch cover!!! Also, there seems to be only one screw in place, should there be two?

    Attached Files:

  2. azbill

    azbill Active Member

  3. no there's only one screw... I have to use this all the time to adjust the tightness of the clutch pads.
  4. npk1977

    npk1977 Guest

    Why do you adjust your clutch all the time? I'm curious, because I think I may need to adjust mine.
  5. I adjust my clutch pads because when I stop, then go again I don't always pedal back to speed before releasing the clutch and I think that's loosening the clutch somehow because every now and then I try to pedal start and I can feel the clutch slipping and I know I need to tighten the pads.

    here's a pic from (each engines clutch area looks slightly different).


    the clutch nut connector covers the clutch pad plate, and is held in place by the gland nut screw. (also, the knee bone's connected to the leg bone).

    you want to take out the screw with a philips head, hold in the actual clutch arm and turn the clutch nut clockwise about 1/4 turn or less. Put the screw back in! then test it and see if your clutch connects now. Otherwise keep tightening it.
    Last edited by a moderator: Aug 9, 2007
  6. this is what's inside (also from