crowvise
Member
The other thing I wanted to add was that the bike "turned over" w/ only 30-40 feet of peddling on a straightaway.
My old 'Fyling Horse' model required a decline on first start and about half the time thereafter.
Should that be a factor I should add into the equation?
Also, I am thinking I should check and make sure I am hearing the STEADY swoosh-pop, swosh-pop of the piston oscillating as I pedal, without engaging the clutch, so that I may be sure that the clutch adjustment I made is functioning at it's fullest capacity.
I didn't listen for jack . Just tried her out after the adjustment and was elated at hearing her purr.
What the f did I just say?!
How can one not have the clutch engaged and have the piston oscillate?!
D@m^ed frosty barley pop.
Yet I still love you, frosty barley pop
Ah ha(!), frosty barley pop to the rescue(!):
To satisfy my personal curisoty's snake I will disengage the magneto's magnet, since I had soldered the wires a bit back, or I will simply desolder them, pedal and listen.
I'm pretty sure I will hear it steadly oscillating with the familarity of my old flying horse. Just want the gratification of verification.
MoPsy, I have always held you as anywhere between a minimum of a high level amatuer to a mid level expert, based upon the posts I have read within which you have responded to.
Although on my second build, I am still (obviously) a complete novice on this topic.
Yes, I could pm you this but I want others to know it.
You have tried to help on this dragon d@mned engine for awhile and I want to offer you something in return. Irregardless if your advice (which someone I consider an expert in the highest degree has p-m-ed me as being, within a high probablity rate, as sound and solid) isn't the exact problem.
I state this publicy:
Pick one of my 2 favorite specialities, you have helped so many and conserved the time of those who are working on other members problems:
1.) egyptain pymarids
2.) twin towers (9-11)
Your selection will be the theme, if you pm me color schemes to match your bike that will be done.
Pm personal intrests, and if they are any I am familiar with, they too will be implemented within the scheme.
This will be a painted gas tank, clutch cover, magneto cover, or whatever the f the cover that houses the clutch arm is called(d@Amned barley pop). Pick one.
I haven't done jack:001_9898: with my spraypaint art in 5 years ( artist block/ depression block?, whatever). I feel like doing something nice for someone who has shown me at least, and considering this is the internet, at the bare minimum, an exterior level of worthiness.
All I ask in return (as the bare minimum) is that you flame the h3ll out of me if [not that it will happen] if I don't deliver.
At the maximum I ask that if you like the art to pay the minimum going rate for the hardware I purchased (i.e. gas tank or cover) at whatever site you find it lowest (although I will buy your selection from Pirate- I like to stick to what has shown itself to me to work) . The paint and art is on me. Or rather, on "US" as you had already definately paid it for by your time and efforts on the behalf of all of us here and since I'm a gimp w/ combustion engines this will also allow me to repay the community what I owe via someone who has contributed much in tech support.
Also, if you like it but simply can't afford to pay for the component hardware then tell me so and sport it /w pride for all you have done here.
I doubt you won't like it.
This is spraypaint art, not air brush. [I can't afford to get a new air bursh (here is an analogy: try working on your motor bike using only dollar store tools. Well, a harbor freight air brush is the equivelant to dollar store tools to an artist) due to the fact that I am having custody of my daughter reinstated. 16yo girls are expensive when you're poor, though worth every last pennypinching moment.] It is done in many multiple layers, some heavier that others depending on the image. But you CAN expect nothing more than 1/2 -3/4 the thickness (meaning less the their drip level- but it isn't drip it is layered paint ) of a standard factory "painted black" purchased gas tank. None, to hardley any, if you chose a flat surface: i.e. a cover & not a tank (but tanks jobs are the shiznet. Aye?)
Anywho,
pick your ones,bro
Will be 3-5 weeks b4 delivered.
Could be sooner but since my life is chaotic at the moment I must allocate myself a time frame within which I will not have to worry about my honor being called into question.
---------------------------------------------------------------------------------------------------- The truth is easy to understand once it is discovered. The point is to discover it.
~Galileo Galilei
I got that queasy shroom gut...
~Fat Apple (the band)
An intellectual hippie?
What?, Are you misguided...
... stop your studies and worship Jesus
F the system
My old 'Fyling Horse' model required a decline on first start and about half the time thereafter.
Should that be a factor I should add into the equation?
Also, I am thinking I should check and make sure I am hearing the STEADY swoosh-pop, swosh-pop of the piston oscillating as I pedal, without engaging the clutch, so that I may be sure that the clutch adjustment I made is functioning at it's fullest capacity.
I didn't listen for jack . Just tried her out after the adjustment and was elated at hearing her purr.
What the f did I just say?!
How can one not have the clutch engaged and have the piston oscillate?!
D@m^ed frosty barley pop.
Yet I still love you, frosty barley pop
Ah ha(!), frosty barley pop to the rescue(!):
To satisfy my personal curisoty's snake I will disengage the magneto's magnet, since I had soldered the wires a bit back, or I will simply desolder them, pedal and listen.
I'm pretty sure I will hear it steadly oscillating with the familarity of my old flying horse. Just want the gratification of verification.
MoPsy, I have always held you as anywhere between a minimum of a high level amatuer to a mid level expert, based upon the posts I have read within which you have responded to.
Although on my second build, I am still (obviously) a complete novice on this topic.
Yes, I could pm you this but I want others to know it.
You have tried to help on this dragon d@mned engine for awhile and I want to offer you something in return. Irregardless if your advice (which someone I consider an expert in the highest degree has p-m-ed me as being, within a high probablity rate, as sound and solid) isn't the exact problem.
I state this publicy:
Pick one of my 2 favorite specialities, you have helped so many and conserved the time of those who are working on other members problems:
1.) egyptain pymarids
2.) twin towers (9-11)
Your selection will be the theme, if you pm me color schemes to match your bike that will be done.
Pm personal intrests, and if they are any I am familiar with, they too will be implemented within the scheme.
This will be a painted gas tank, clutch cover, magneto cover, or whatever the f the cover that houses the clutch arm is called(d@Amned barley pop). Pick one.
I haven't done jack:001_9898: with my spraypaint art in 5 years ( artist block/ depression block?, whatever). I feel like doing something nice for someone who has shown me at least, and considering this is the internet, at the bare minimum, an exterior level of worthiness.
All I ask in return (as the bare minimum) is that you flame the h3ll out of me if [not that it will happen] if I don't deliver.
At the maximum I ask that if you like the art to pay the minimum going rate for the hardware I purchased (i.e. gas tank or cover) at whatever site you find it lowest (although I will buy your selection from Pirate- I like to stick to what has shown itself to me to work) . The paint and art is on me. Or rather, on "US" as you had already definately paid it for by your time and efforts on the behalf of all of us here and since I'm a gimp w/ combustion engines this will also allow me to repay the community what I owe via someone who has contributed much in tech support.
Also, if you like it but simply can't afford to pay for the component hardware then tell me so and sport it /w pride for all you have done here.
I doubt you won't like it.
This is spraypaint art, not air brush. [I can't afford to get a new air bursh (here is an analogy: try working on your motor bike using only dollar store tools. Well, a harbor freight air brush is the equivelant to dollar store tools to an artist) due to the fact that I am having custody of my daughter reinstated. 16yo girls are expensive when you're poor, though worth every last pennypinching moment.] It is done in many multiple layers, some heavier that others depending on the image. But you CAN expect nothing more than 1/2 -3/4 the thickness (meaning less the their drip level- but it isn't drip it is layered paint ) of a standard factory "painted black" purchased gas tank. None, to hardley any, if you chose a flat surface: i.e. a cover & not a tank (but tanks jobs are the shiznet. Aye?)
Anywho,
pick your ones,bro
Will be 3-5 weeks b4 delivered.
Could be sooner but since my life is chaotic at the moment I must allocate myself a time frame within which I will not have to worry about my honor being called into question.
---------------------------------------------------------------------------------------------------- The truth is easy to understand once it is discovered. The point is to discover it.
~Galileo Galilei
I got that queasy shroom gut...
~Fat Apple (the band)
An intellectual hippie?
What?, Are you misguided...
... stop your studies and worship Jesus
F the system
Last edited: