Cory's Monster Whizzer project

Discussion in 'Whizzer Motorized Bicycles' started by cory, Feb 5, 2008.

Tags: Add Tags
  1. cory

    cory Guest

    Box full of Whizzer parts and no instructions

    Posted a project a while back called monster Whizzer. Have recieved the motor re worked by Ralph at Woodstock Whizzer that included (hi fin hi comression head, cast iron cylinder for big valves, copper head gasket, hp head bolt and washer kit 2/oilet brass valve guides, 2/valve springs and retainers, 2/ stainless valves with chrome stems and hardened tips, custom valve cover door w/baffle and hose w/ filters, and hi lift camshaft. The motor looks bullet proof. Am not running bat system or lights. Does anyone have access to new Whizzer kit installation instructions? I would be more than happy to pay someone to fax me a copy. Alot of the instructions would be NA but could realy use them for motor positioning and clutch instructions. Looking at all the parts the hardest thing will be welding the weldable motor mounts Ralph sent me. He set the electrical system up so all I have to do is plug the wires together and Im good. Also does anyone know of someone building gas tanks that dont look like a patatoe sitting on the backbone of a bike. Building this bike to look like a board track racer and would love to use a tank that looks like a 1917 Harley or Excelsior. Once again NEED WHIZZER KIT INSTALLATION INSTRUCTIONS, pref faxed, mWILL PAY!!!!!!!!!!! Stay away from the road rash, Cory.

  2. Board track type bike

    Hi cory, have you seen my bikes? I'll look and see if I have an install book, I should, but, who knows?

  3. bill green

    bill green Member

    Hi Cory If Mike cant find his, I can copy the only one I have ,Its easy making A five wire system.Let me know what you need. Bill Green Vancouver Whizzer
  4. bill green

    bill green Member

    Hi Cory Got your fax number I will go go by kinkos tomarrow you will get it.hope this helps .Bill Green Vancouver Whizzer ..............UPDATE.......... Mike no need to keep looking have already faxed copy to cory.. have A great day Bill
    Last edited: Feb 6, 2008
  5. cory

    cory Guest

    Whizzer Whizzards to the Rescue!

    Some days everything works out perfect. Yesturday I posted the fact I had recieved a Whizzer kit and didnt have a copy of the installation instructions. Both Motorbikemike and Bill Green said they would look for there copys and get back to me. Bill started faxing over the entire 26 sheet installation manual to my office before 8:00 am thismorning. Cant tell you how much it ment to me to have other people help me out so fast. Thank you Bill and Mike, hope to help you people out some day. Well, time to start making the sparks fly. THANK YOU! Cory...
  6. azbill

    azbill Active Member

    this place, and the people here ROCK !!! :D:D:D
    the camaraderie is almost better than the info :)
  7. bill green

    bill green Member

    Hi cory glad I could help.If you need anything else just ask ,Look forward to seeing you this fall at iron horse ranch......Bill Green Vancouver Whizzer
  8. RdKryton

    RdKryton Active Member

    More Kudos

    I think this is the right thread to thank Quenton. He has gone out of his way to help me with my upcoming upgrade of my WC-1 motor. Thanks to him I have all the parts and info I need to do this project. Now I just need to get the time. The high quality information I have received from Quenton is hard to put a price on. MotorbikeMike has also been very forthcoming with quality info. His post about oil for the Whizzer in a recent thread comes to mind. Everyone here is the best. I don't know where I would be without you guys. Thanks again.

  9. cory

    cory Guest

    Just about ready to start tack welding the motor mounts on my Fleetwing for the Whizzer motor. Any of you guys have any helpfull hints or tips they dont mention in the installation manual. Using my lincoln arc welder for the tacks but will ask a friend to wire feed the mounts after everything is set.
  10. Scottm

    Scottm Guest

    It is an honor to be around such good people!
  11. bill green

    bill green Member

    cory I would tack it up and fit the motor for alignment before the weld up. have fun ....Bill Green Vancouver Whizzer
  12. cory

    cory Guest

    First pics of THE MONSTER WHIZZER

    Ok folks, wanted to build a board track racer out of a Firestone Fleetwing frame I had stuck up in the loft of the garage. Had Westmans full 1, 2, 3 super whizzer goodies put on the motor and a custom seat built you see just sitting on the frame with a rag spacer. Bought solo springs and will fabricate brackets for later. Built an internal tank to go between the back bones, and a false tank out of old growth maple that was verathaned till it was like glass to accept the dark blood red paint I will be shooting it with. Posted a question the other day about tips on motor mount installation. I know why not many people answered, mounting this thing was like giving birth. After a half a dozen different tries tack welding various positions and grinding a mount I figured it out. This frame had alot less room than I thought. Thanks everyone for the advice and help so far. Youre a group of cool dudes!!! Cory. PANA0001.JPG



  13. Wow... now this is a custom bike. Great job...look foraward to seeing the finished product.
  14. Dockspa1

    Dockspa1 Guest

    Ya can't wait to see it when you are all done. As if we ever are all done!
  15. bill green

    bill green Member

    Hi Cory I like the look are those workman wheels .Cant wait to see it done k . Keep up the great work....Bill Green Vancouver Whizzer
  16. Whizzer 58

    Whizzer 58 Member

    You are doing a fine job and I really like the white tires, it makes the bike look old and fast. Keep up the good work............regards Ed
  17. bill green

    bill green Member

    Hi guys its easy to help when you love building whizzers and like people I see sun today yah Bill Green Vancouver Whizzer
  18. RdKryton

    RdKryton Active Member

    Very nice. Can't wait to see it finished.

  19. azbill

    azbill Active Member

    I love watching projects being created
    it makes me feel like we are all there at the birth :D