Could someone just tell me what I need?

[DieselTech]

What does the carb look like? Pics do wonders.

What is the bolt width measurement of the intake port of the engine you are using?

What width is the carb bolt spacing, or the throat size of the carb?

We all kinda need to know these things to offer better help/suggestions.

 

[Wtg78]

Like this and this what I already have for it. I have a os reed valve 21mm coming that will be the spigot the carb is as big as the motor. See what I mean.

 

[DieselTech]

Like this and this what I already have for it. I have a os reed valve 21mm coming that will be the spigot the carb is as big as the motor. See what I mean.

Where the carb mounts in the rubber boot, measure the spigot of the carburetor. Outside Diameter in mm

 

[Chainlube]

There is a point where you have too much carb, and this is it.

 

[DieselTech]

There is a point where you have too much carb, and this is it.

Yeah I find a 19mm dellorto phbg is about perfect.

 

[Darwin]

?????????????

Off Set Air Intake Manifold

Providing a safe means of fuel transport, the 2-Stroke Intake Manifold features an angled pipe to provide gravity fed gas to your engine for a secure flow.

www.bikeberry.com

 

[Chainlube]

?????????????
View attachment 224613

Off Set Air Intake Manifold

Providing a safe means of fuel transport, the 2-Stroke Intake Manifold features an angled pipe to provide gravity fed gas to your engine for a secure flow.

www.bikeberry.com

What I find unusual bout that manifold is the pipe joints are laser welded, but not the flange.

 

[Sidewinder Jerry]

What I find unusual bout that manifold is the pipe joints are laser welded, but not the flange.

Perhaps they cut the offset off of something else then welded it to the flange.

 

[Gordy]

What I find unusual bout that manifold is the pipe joints are laser welded, but not the flange.

Maybe the 5 year old kid that welded on the flange is no good with a Lazer welder?

 

[DAMIEN1307]

Maybe the 5 year old kid that welded on the flange is no good with a Lazer welder?

Now come on there Gordy, those Chinese don't violate their child labour laws...Those kids have to be at least 9 years old to start working...lol...lol...lol.