For Sale Custom motorized bike gaskets, MADE IN USA!

Well, after a few years of motorized bike experience and building countless kits, I've always had a problem with the crappy gaskets they come with, they would always either rip on me whenever I needed to remove the cylinder or intake or they were soo thin that it wouldn't seal properly even when cranking down on the bolts as hard as possible.


Sooo, I decided to make my own!

There cut on my CNC cutter and quality checked by yours truly, I use the best material's that I can find (fel-pro)

The rubberized cork gasket and the Karropak withstands the bend test with flying colors!

I'm currently offering these gaskets for the intake as well as the base gasket.

You get 2 Karropak base gaskets and rubberized cork base gasket as well as 2 Karropak intake gaskets and 1 rubberized cork intake gasket all for 15$ shipped (lower 48)

Due to popular demand, I will now be offering my chainsaw gaskets made of Karropak, these will fit the chainsaw carb conversions (Tillotson HS254B carbs to be specific)
You get 5 gaskets for 10$ shipped (lower 48)

For sales or inquires: Either PM me or email me at markmakesgaskets@gmail.com

 

[Karl Snarl]

.......
Here's a pic of some of the custom gaskets Mark made for me. These are for the hs254b and the rwj-4b carbs. I had him extend the gasket some. The stock gaskets tend to leak if you don't get them on just right. It's because they are a few mills smaller than these custom gaskets. The stock gasket doesn't even come to the edge of the carb, which is why Mark worked with me to get these made. They are a trickey gasket to make, and he did a bang up job. Thank you Mark

This is my third order from Mark. Don't be afraid y'all, he's honest and will work with you to get a gasket to your spec. I recommend you try his before you buy else where. They fit way better than a stock gasket.

 

[mark20]

BUMPer

Still making gaskets!

 

[DAMIEN1307]

Still making gaskets!

And i can tell ya all he is making the best gaskets so far...They beat out those cheapie Chinese ones by a mile...lol...DAMIEN

 

[Karl Snarl]

And i can tell ya all he is making the best gaskets so far...They beat out those cheapie Chinese ones by a mile...lol...DAMIEN

Wait, I thought @mark20 was Chinese? JK.

 

[DAMIEN1307]

Wait, I thought @mark20 was Chinese? JK.

I believe he is actually Ukranian/American...im sure that @mark20 will correct me if im wrong...lol.

 

[Mossy]

Fel pro is made in Illinois... And chine but better material then the cereal box cardboard ones

 

[DAMIEN1307]

Fel pro is made in Illinois...

He buys his material in bulk form from the likes of Fel Pro etc. and custom makes all his gaskets for us here in the forums...DAMIEN

 

[Mossy]

He buys his material in bulk form from the likes of Fel Pro etc. and custom makes all his gaskets for us here in the forums...DAMIEN

How does he take payments?

 

[DAMIEN1307]

How does he take payments?

He is so affordable, I that i just put cash in an envelope surrounded with a note so as not to be visible that its cash...lol...even if it was stolen, i wouldn't miss it...lol...Just PM him.

 

[Mossy]

What about copper or stainless base /head gaskets 14- 32gauge