J
japennell
Guest
I recently took out my powerbike that I made with the help of this board from last Fall.
While riding it to work, i got a flat. After changing it, I realized that my rim is bent and that I had two broken spokes.
I decided to move the sprocket to an old rear wheel I had. Well, I noticed that there are fairly deep gouges on the inside of the sprocket. They line up with the part of the spoke that connects to the hub.
My first thought is that I must have overtightened them on installation last Fall. I have read of a number who have changed there sprocket size and was wondering how 'normal' this is.
Thanks
While riding it to work, i got a flat. After changing it, I realized that my rim is bent and that I had two broken spokes.
I decided to move the sprocket to an old rear wheel I had. Well, I noticed that there are fairly deep gouges on the inside of the sprocket. They line up with the part of the spoke that connects to the hub.
My first thought is that I must have overtightened them on installation last Fall. I have read of a number who have changed there sprocket size and was wondering how 'normal' this is.
Thanks
Last edited by a moderator: