Disc brake sprocket set up

Discussion in 'General Questions' started by Tim M, May 10, 2016.

  1. Tim M

    Tim M New Member

    I have a Skyhawk gt2-a frame and i have a 44 tooth cnc sproket set up. I am trying to figure out how to make it able to use a disk brake set up. Can sopmeone give me some ideas or link to vids or something. Thanks guys

  2. Rob H

    Rob H Member

  3. Rob H

    Rob H Member

    image.jpeg I did that on mine originally I don't use it anymore because I put the shift kit on but I drilled a larger diameter hole in it using a 2" hole saw for the hub.Get a piece of 2x4 and 2 1and 5/8" screws and screw it down tightly then find center place your pilot down and drill. It will fit perfectly over hub and tack weld the sprocket to the hub
  4. Rob H

    Rob H Member

    U will have to space the bridge for the caliper then space the rear wheel accordingly