disk to freewheel

Discussion in 'Bicycle Repair' started by junme, Nov 8, 2009.

  1. junme

    junme New Member

    I guess this has been done before
    just thought I would share the idea




  2. ocscully

    ocscully Member

    The only problem with your solution is that the freewheel will have a tendency to unscrew itself during use. Assuming the brake rotor and freewheel are on the left side of the bike?

  3. junme

    junme New Member

    Its going on the right hand side, but is being driven so will have same problem more of a means to locate the cog
  4. loquin

    loquin Active Member

    If it's on the right side, as the motor pulls the chain under load, it'll tighten the freewheel.
  5. junme

    junme New Member

    sorry I worded that wrong :dunce: the adaptor will be on a motor-jack-shaft that is driving not driven so it will want to undo too