MasterLink
Member
well when i put this 4 stroke together i was amazed at the amount of gas that was in this gas line was always about 1/4 inch. and i never seen any gas go into the fuel filter, and some times there would be none after the the filter my motor was running bad boging at take off .. i thought for sure it was a carb issue at first so i took that off cleaned and took a drumel to the air/fuel set screw was only seting for 1and 5 o'clock put all back together and same thing then ..i thought about the valves setting i didnt think i had enough hours on the motor for that less then 100 hrs then i had a look at the gas issue in my fuel lines and why i had my tank drained i would redo my tanks paint the petcock screen had some debris not enough to slow the gas down i had a stream of gas ...iam thinking these motors need gas well i drilled the petcock out to try to make the opening bigger only thing that did was make it leak at that nut so i went to ace and got a fuel bur 1/8 x1/4 i think that was the size big difference i have FUEL in my lines and a great running motor