Ok, so it turns out only the first few threads were stripped in the stud and I got a bolt to go all the way in and the motor is fine. Took it for a test drive, started up right away, warmed it up, and rode it.
It is the smoothest ride ever!
Except for the fact that I am using a very worn chain, It's temporary until I order the new one.
So I got back in to tighten some things that got loose, and I notice the bolt for my springer forks is loose, so I try to tighten it...and it won't budge. So now my forks are wobbly, and it's very scary to ride... And I chipped off alot of black paint in my effort to tighten it.
My seat broke loose from the frame and I strapped it down tight with black duct tape.
Thanks BikeGuy Joe, for sending me the chain needed to complete the loop and start the bike for testing. A few more problems that should be fixed by this weekend before I can ride it regularly.
Electrical system will be installed AFTER I get the kinks out of everything else.