gearhead437
Well-Known Member
- Local time
- 2:36 PM
- Joined
- Jan 11, 2020
- Messages
- 254
Dear Fellow Members-Don't know if this is recommended, but I apply a very small amount of Lithium grease on the teeth of the engine crank drive gear and the clutch gear. I also apply a small amount of grease to the bucking bar/ ball and the pivot area of the clutch release lever where it's shaft rotates. I realize that grease can contaminate the clutch pressure pads, but have been using the 49cc Grubbee GT-2B for about 10 years. Only problem I now have is the clutch sticking during initial use. Does the drive/clutch plate gears need any grease?I only ask as I plan on replacing the stock pads with the orange high temp pads and want to ensure that I am doing everything correctly. Thanx for any feedback-Gearhead