E3.10

[Freddy Snottgrass]

I was at the hardware store today grabbing some nuts and bolts. I decided to pick up a new spark plug so I could do that hot engine high RPM spark plug test thing . They didn't have any NGK or Champion B6S but there was this E3.10 that said it was compatible with the B6S. https://shop.e3sparkplugs.com/lawn-garden-spark-plugs/e3.10-spark-plug/

Any experience with these?

 

[Karl Snarl]

I was at the hardware store today grabbing some nuts and bolts. I decided to pick up a new spark plug so I could do that hot engine high RPM spark plug test thing . They didn't have any NGK or Champion B6S but there was this E3.10 that said it was compatible with the B6S. https://shop.e3sparkplugs.com/lawn-garden-spark-plugs/e3.10-spark-plug/

Any experience with these?

I use them in my truck and motorcycle. They do burn better than anything else I have ever used. I hear good things about them in our engines. Just haven't tried them on my engines yet. Seen them on a few other bikes, idk the size though, and they seemed to do well.

 

[darwin]

Jut my experience and from what I read, go with the NKG brand. Have no experience with that plug# though just the brands.

 

[Freddy Snottgrass]

Thanks. I just wanna make sure it isn't gonna end up like another thread I was reading where they were deciding if the plug was too long or not.

They didn't have NGK B6 anything or Champion's compatible.

 

[DieselTech]

I was at the hardware store today grabbing some nuts and bolts. I decided to pick up a new spark plug so I could do that hot engine high RPM spark plug test thing . They didn't have any NGK or Champion B6S but there was this E3.10 that said it was compatible with the B6S. https://shop.e3sparkplugs.com/lawn-garden-spark-plugs/e3.10-spark-plug/

Any experience with these?

I've had really good luck with E3 plugs in my truck, but they really shined in my riding mowers. My mowers started easier & seem to get more mow time on less fuel. I've yet to try 1 in my 2 stroke, there hard to find around here unless u order them.

 

[Chainlube]

Thanks. I just wanna make sure it isn't gonna end up like another thread I was reading where they were deciding if the plug was too long or not.

They didn't have NGK B6 anything or Champion's compatible.

The Champion # is L82C

 

[darwin]

Looked up a Chamion L82C plug and couldn't find one.

 

[DieselTech]

Thanks. I just wanna make sure it isn't gonna end up like another thread I was reading where they were deciding if the plug was too long or not.

They didn't have NGK B6 anything or Champion's compatible.

I believe our 2 strokes mainly use a 12.7mm/13mm reach plug. There sometimes referred to as a ½" reach plug.

 

[Chainlube]

Looked up a Chamion L82C plug and couldn't find one.

http://importationsthibault.com/wp-content/uploads/flipping-books/pieces_2017_en/Motorcycle-2017-Parts/assets/common/downloads/page0865.pdf

 

[Wrench]

The Chamion # is L82C

Chamion CHAMPION