The spring should fit!
Heres a video on how to install it (if you are bored and got 10$ to spend)
You don't really need the bits in the beginning, or drilling the clutch, ive just used a table
Engine No power
- Thread starter Gastrike 9
- Start date
Heres a video on how to install it (if you are bored and got 10$ to spend)
You don't really need the bits in the beginning, or drilling the clutch, ive just used a table
Gastrike 9
New Member
- Local time
- 2:02 PM
- Joined
- Jan 21, 2020
- Messages
- 29
This seems to be the largest sprocket I can find that will match up to the hub adapter... Changed to a maxtorque clutch helped a lot but now the engine bogs a tiny bit now going uphill so I think maybe this sprocket will do what I need... Any thoughts on mph drop ?.. 22mph using the current 48 tooth switching to a 60 tooth ?..
60 Tooth Sprocket for 415 or #41 Chain fits Sprocket Adapters U.S.A. - MBRebel.com
7075-T6 Aircraft heat treated aluminum milled in the U.S.A. this sprocket fits U.S.A. made sprocket adapters, and Chinese made sprocket adapters with 8mm or 10mm bolts. MBRebel Sprockets are also 6 Chainring Bolt compatible with the Disc Brake Adapter Sprocket to Hub SKU: 20229 sold separately...
mbrebel.com
Chainlube
Well-Known Member
That will give you the best hill climbing power, how many teeth on the clutch gear?
Gastrike 9
New Member
- Local time
- 2:02 PM
- Joined
- Jan 21, 2020
- Messages
- 29
10 on the clutch...
Gastrike 9
New Member
- Local time
- 2:02 PM
- Joined
- Jan 21, 2020
- Messages
- 29
Replaced the 48 with the 60 tooth sprocket... Also the clutch... Made a huge difference... I've built several hasbikes but this trike was a learning curve... I wish I could bypass the governor but 22mph is Texas law so I've gotta comply... I am gonna build another soon and bypass the governor on it and use it on dirt roads and tracks... Thanks for the help folks...
