T
Topher39
Guest
Hello, new rider, have a dax 70cc on a mountain type bike. All hooked up, started fine, running OK for a new motor with only about 12 miles on it. The one thing I noticed right away was not the exhaust noise but a whirring type noise. I found removing the plate covering the clutch helped a lot, as it seemed to amplify the sound. I still hear this whirring noise and it sounds odd to me. I lubed the gears with some white litheum grease and I see no wearing etc. Not sure if this is from the clutch or what. Any ideas? I would like to put the clutch cover plate back on as well. Hard to know what is normal, or due to break in etc. as this is my first experience with it. To give you an example of the noise level of this "whirring" with the cover plate on - I could hear it much more than the rest of bike/motor as my son drove down the block.
Another quick question - I live at an altitude of 3500 feet - ideas for best setting for carb?
Topher Dax 70cc
Another quick question - I live at an altitude of 3500 feet - ideas for best setting for carb?
Topher Dax 70cc