runslikeapenguin
Member
- Local time
- 7:39 AM
- Joined
- Aug 8, 2008
- Messages
- 46
where did you get those cones? did you roll them yourself?
where did you get those cones? did you roll them yourself?
Thats was an experiment to test the resonant qualities of aluminum that was harder than sheet stock. So I machined those cones from bar.
Rolling cones isn't that hard provided you have a slip roll with a small enough diameter top roll to fit in pipe.
Cutting up existing pipes is an easy way to get cones.
Rolling cones isn't that hard provided you have a slip roll with a small enough diameter top roll to fit in pipe.
Cutting up existing pipes is an easy way to get cones.
robin bird
Member
cabinfever1977
Member
my bike will do 28-30mph+ all stock parts and stock muffler
which is 45kph+
my bike takes off like a rocket and goes up hills like a rocket - stock
48cc dual start starfire GT2 44T sprocket on 26" mountainbike
which is 45kph+
my bike takes off like a rocket and goes up hills like a rocket - stock
48cc dual start starfire GT2 44T sprocket on 26" mountainbike
D
djase10
Guest
latest expansion chamber
Hi All.
It's been a while , study and exams have taken priority,
but here is the latest pipe i done .
This chamber is a fusion of a **** pocket bike pipe,
and a body of a stock muffler, and the result is PRETTY good for this 66cc.
About the right loudness for cars to hear me.
** used an old seat post again for length to the muffler**
Thats good to hear cabinfever1977, but 45km/h doesnt cut it for me ,
I'd be left behind on our social rides@45.
Take care on the roads everyone.
Jase
Hi All.
It's been a while , study and exams have taken priority,
but here is the latest pipe i done .
This chamber is a fusion of a **** pocket bike pipe,
and a body of a stock muffler, and the result is PRETTY good for this 66cc.
About the right loudness for cars to hear me.
** used an old seat post again for length to the muffler**
Thats good to hear cabinfever1977, but 45km/h doesnt cut it for me ,
I'd be left behind on our social rides@45.
Take care on the roads everyone.
Jase
Attachments
jlebh1
Member
thats a great design what is your top speed and how well does your bike go up steep hills?
D
djase10
Guest
LARGE expansion chamber & 19mm carb with 3 jets
Thanks jlebh1,
yeah top speed between 55-60kn/h with 34 tooth sprocket.
Up hills - i got to pedal but i get to the top -- with some sweat out of my head .
*******************************
I have another (more expensive ) water cooled pocket bike expansion that i will chop up and graft into a NICE ONE to suit the HT..
*****
In conjunction with this 19mm three jet carby
Should give me the performance ive wanted from the start!!
Cheers,
Jase
Thanks jlebh1,
yeah top speed between 55-60kn/h with 34 tooth sprocket.
Up hills - i got to pedal but i get to the top -- with some sweat out of my head .
*******************************
I have another (more expensive ) water cooled pocket bike expansion that i will chop up and graft into a NICE ONE to suit the HT..
*****
In conjunction with this 19mm three jet carby
Should give me the performance ive wanted from the start!!
Cheers,
Jase
Attachments
Similar threads
