First Time not starting - HT Powerking

[japennell]

It also appears that you have not install an inline fuel filter. Though this may not have any bearing on your current problem, many have suggested installing one. (And it is very easy.)

It is a filter that rest in between the tank and the engine. You cut the fuel line and install it, connecting each of the two pieces of fuel line to each end of the fuel filter.

 

[adamtheha]

If you really need a kill switch, you CAN use the stock one (I do), but don't connect anything to the white wire. Cap it or cut it right off, it's useless. Connect the yellow wire to the blue/green one (expose a bit more of the copper strands, slide it into the male end of one blue, and put the other blue one inside. Then solder together), and solder the black on to some piece of exposed metal, either on the engine or the bike. I used the mounting bracket.
The switch cuts power to the spark plug, sending it into your bike instead. Using the white wire will apparently kill your magneto, that's the general consensus.