first timer

K

Kellie

Guest
I just built my first2 stroke Chinese Motor bicycle. I was so proud that i accomplished assigning my bike. I get ready for take off, get up speed and let go of the clutch And it seems to want start i keep peddling abd pull throttle keep peddling but out never stays running help
 
Check your idle screw. Get it started, and turn it in to turn up the idle. If this is the problem, if not make sure you are getting enough fuel into the engine. Check to make sure your fuel shut off is all the way open. Remove spark plug and see if it is wet, if so, it's getting too much fuel and you may have to jet it down. I'm might be full of water on these "fixes" as I am still learning also.





 
Back
Top