Fitment question on on rear wheel and frame
- Thread starter ETHAN5438
- Start date
michael whiteman
Well-Known Member
- Local time
- 12:24 PM
- Joined
- Mar 2, 2021
- Messages
- 623
"is the back too tight?" Assuming you will use the wheel and tire we see, the answer is .......you really can't tell. We would need a shot from the rear directed at the axle to determine the frame clearance. Are you sure the motor will fit? You didn't mention ......2 or 4 stroke. You can get the overall dimensions and make a cardboard mock-up to hold in that opening just to be sure.
Chainlube
Well-Known Member
That looks like a fixie bike, might not be any good.
Okay yeah I did a bit a research after posting this and found a few problems I might run into with a fixie.my problem is right now I got a specialized rock hopper but the back wheel is a 32 spike.
Chainlube
Well-Known Member
Look for a new rear wheel with 36 spokes. Lots on ebay.
Okay thanks I found a bike that works for pretty cheap.
