Carby Fitting a Pz19 on a G-2 Reed

Brayden Yancey

New Member
Local time
8:35 AM
Joined
Nov 21, 2022
Messages
25
I have a Pz19 carb and I was wonder if there is a adapter for it to a g-2 Reed
The Pz19 stud holes are 48mm
The Reed valve outer diameter is 19mm
Does anyone know adapter for that
 
There are adapters that bolt to the carb flange so it can mount to a rubber socket (bit if hose) out there. I usually see them on ebay.
 
Links to eBay may include affiliate code. If you click on an eBay link and make a purchase, this forum may earn a small commission.
If you have a tight frame, you'll need an offset intake manifold. By the time you put the adaptor and the hose on that would be the same size as the existing carb.
You can probably cut down the intake and adapter as well to take some length off. Or the intake is offset like most G2 setups. Or both
 
Back
Top