Fred Head Questions

[HumanPerson]

Is that flowing towards the exhaust or the intake side?

Smooth the inside to flow with the outside man.

If that is the exhaust side of the transfer port the you want to redirect it.....to the intake side.... @Street Ryderz would be best to explain that to ya man.

Listen to what @Street Ryderz tells you and ya can't mess up.

I think you are complicating this my friend.

 

[HumanPerson]

This is an older post somewhere http://www.dragonfly75.com/motorbike/transfers.html

 

[Member 30571]

WHOA ........ STOP !!. You never take anything off the steel sleeve in red

 

[YetiWoodz]

It's the intake side

 

[HumanPerson]

WHOA ........ STOP !!. You never take anything off the steel sleeve in red

If it's on the exhaust side...redirect...intake side...smooth flow...

 

[HumanPerson]

re-direct with jbweld. intake side just smooth the flow from interior to outside the sleev man.

 

[HumanPerson]

can't be any simpler....I'll send you a darn cylinder already redirected and ported.

 

[Member 30571]

Ok, I'd never do that... But... carry on.

 

[HumanPerson]

Ok, I'd never do that... But... carry on.

Why wouldn't you?
The cross talk on the top of the piston will take power away unless redireted it is taking power away, i'd say.

@Street Ryderz can you clear this up?

 

[YetiWoodz]

This is an older post somewhere http://www.dragonfly75.com/motorbike/transfers.html

Ok, after reading this I understand a few key things I was confused about. Thanks