Free floating clutch stud?

[Will'smotobikes19]

I took my clutch cover off and what do I see but one of the 3 pins for the clutch plate was sticking out farther than the others. Turns out the dumb thing is loose, I don't know how they put them in there riveting? they're always crooked. This could be a problem if I start to take longer rides if that pin is grinding against my clutch cover. Is the only way to fix it buying a new clutch?

 

[MotorBicycleRacing]

pins for the clutch plate are a press fit.
no rivets.
Red locktite the pin?

 

[MotorBicycleRacing]

I took my clutch cover off and what do I see but one of the 3 pins for the clutch plate was sticking out farther than the others. Turns out the dumb thing is loose, I don't know how they put them in there riveting? they're always crooked. This could be a problem if I start to take longer rides if that pin is grinding against my clutch cover. Is the only way to fix it buying a new clutch?

Is the pin undersize or the hole oversize?

 

[Will'smotobikes19]

Not sure I’d say the pin is it’s quite loose just with a small tap it moves. A vernier, torque wrench and welder are on my list of things to get.

 

[Will'smotobikes19]

I'll just see if I can get my cousin to weld it it started rubbing again I could hear it touching the cover.