M
Member 28982
Guest
Ive put roughly 1,000 miles on my 7 speed beach cruiser since I install a 49cc motor. I tightened the chain tension because the chain is stretching, became loose where chain was falling off back tire sprocket when going fast over bumpier terrain..
Anyways.. With clutch engaged I can move bike freely but back wheel wont even move when clutch disengaged. Normally I would hear engine compression as I rode it as if no gas...but since the back wheel won't move I'm not sure if it's the drivetrain issue inside the engine behind the sprocket. I've opened cover. Just real greasy and appears to have metal shavings... What might I need to replace? I already ordered new chain and tensioner.
Please help... I put 20 miles a day on it...usually.
P.s. the chain isn't bunched up around the sprocket, as I said it moves when the clutch is engaged but when the clutch is not engaged it doesn't do anything except freeze.
Would the magneto have anything to do with this?
Anyways.. With clutch engaged I can move bike freely but back wheel wont even move when clutch disengaged. Normally I would hear engine compression as I rode it as if no gas...but since the back wheel won't move I'm not sure if it's the drivetrain issue inside the engine behind the sprocket. I've opened cover. Just real greasy and appears to have metal shavings... What might I need to replace? I already ordered new chain and tensioner.
Please help... I put 20 miles a day on it...usually.
P.s. the chain isn't bunched up around the sprocket, as I said it moves when the clutch is engaged but when the clutch is not engaged it doesn't do anything except freeze.
Would the magneto have anything to do with this?